|
The
following list presents a number of publications produced by the following
authors. If you would like a copy of a publication, please email the author.
Contact details are on the
"Contact Us" web page.
Fred Salome's Publications
Bill McEwan's Publications
Don Bartlett's Publications
Fred Salome's
Publications
Tank Linings
Protective Coatings For Corrosion Control, University of NSW School of
Applied Sciences, 24/08/85
Protection Of Concrete Floors (Bayliss,
Dr. S. & Salome, F.) Heavy Duty Coatings For Steel, UNSW School of
Applied Sciences, 04/09/87
Liquid Applied Ultra High Build Coating For
In-Situ Pipeline Refurbishment Australasian Corrosion Association 1988
Conferenc.
Coatings for Corrosion Control and Fire
Protection, Building Sealants And Coatings Seminar, Melbourne
Seminar Services, October 1988.
Water Borne Epoxy Coatings (Salome, F &
Jewson, G) Australasian Corrosion Association Conference Corrosion 28,
Perth, Nov. 1988.
Ultra-High Build Elastomeric Urethane
Membrane Coating, Corrosion Control Via Heavy Duty Coatings,
UNSW School of Applied Sciences, 28/09/89
Protective Coatings and Anti-Foulings For
Small Craft Control Of Corrosion In Small Craft, ACA Tasmanian
Branch, 10/10/89
Liquid-Applied Waterproof Membrane For
Concrete Coatings Toward 2000 And Beyond, ACA Victorian Branch,
22/11/89
Investigation and Refurbishment of Re-Bar
Corrosion in Concrete Status Of Heavy Duty Coatings, UNSW School
of Applied Sciences, 27/09/90
Protective Coatings for Concrete Concrete
Repair Seminar And Exhibition, Building Research Centre, UNSW. 18/04/91 &
05/09/91.
Solventless Industrial Coatings
Heavy Duty Coatings For Corrosion Control, UNSW School of Applied Sciences,
03/10/91
Silane Impregnation for Protection of
Concrete Australasian Corrosion Association Conference Corrosion 32,
Hobart, November 1992.
Evaluation of a Spot Test for Detection of
Lead Surface Coatings Australia, 30, No. 9, p16‑17, September
1993.
An Evaluation of Water Repellents for
Concrete Presented at AustRoads 1994 Bridges Conference, Melbourne Feb.
16-18, 1994.
Environmental and Occupational Health and
Safety Aspects of Lead Paint Removal Presented at Corrosion Prevention
Centre of Australia Seminar, Coatings Towards 2000 and Beyond, Melbourne,
March 16, 1994.
Practical Considerations in the Removal of
Lead Based Paint (Chadwick, P. J. & Salome, F) Australasian Corrosion
Association Conference Corrosion & Prevention 94, Adelaide, Nov. 1994.
Managing Lead Paint Removal Industrial
Coatings and Corrosion Prevention, UNSW School of Materials Science and
Engineering, 28/11/95.
Australian Standards
For Lead Paint Management
Presented at Corrosion Prevention Centre of Australia Seminar, Coatings
Towards 2000 and Beyond, Melbourne, April 18, 1996.
Lead Paint Management, B. Gulson and F.
Salome; 1996 Training manual for lead paint management course at Macquarie
University Centre for Open Education.
Field Evaluation of the Mitigating Effect of
Silane Treatment on AAR in Concrete Railway Sleepers 10th
International Conference on Alkali-Aggregate Reaction in Concrete,
Melbourne, August 21, 1996.
Occupational Exposures and Hazardous Wastes from Abrasive Blast Cleaning,
Howard Morris and Fred Salome; 13th International Corrosion
Conference Towards Corrosion Prevention, Melbourne, November 1996.
Occupational Exposures Associated with
Abrasive Blast Cleaning, BCCA National Conference, Brisbane, August 18
1997.
Coatings for Concrete
- An Overview,
Presented at Corrosion Prevention Centre of Australia Seminar, Coatings for
Concrete, Melbourne, August 21, 1997.
Recent Australian Experience in Lead Paint Management, Heavy
Duty Coatings for Corrosion Protection, UNSW School of Materials Science
and Engineering, October 1997.
Coatings for Concrete, Workshop Seminar,
Australasian Corrosion Association Conference Corrosion & Prevention 97,
Brisbane, Nov. 1997.
Specifications for Concrete Impregnation
Howard Morris and Fred Salome; Presented at AustRoads 1997 Bridges
Conference, Sydney, December 3–5, 1997.
Occupational Exposure to Heavy Metals from
Bridge Maintenance Painting Howard Morris and Fred Salome; Presented at
AustRoads 1997 Bridges Conference, Sydney, Dec, 3‑5, 1997.
Synthetic Flooring Systems for Hotel Bars,
Kitchens and Back-of-House, The Hotel Engineer, Winter 98.
Coatings for Concrete, BCCA National
Conference, Albury, August 24 1998.
Corrosion Potentials and Chloride Profiles
for Reinforced Concrete Structures, Australasian Corrosion Association
Conference Corrosion & Prevention 98, Hobart, November 1998.
Recent Case Histories of Lead Paint Removal
in Australia, BCCA National Conference, Barossa Valley, September 9,
1999.
Corrosion Rates of Concrete and Steel in
Sewers, Salome, F. & Horlyck, L.; Australasian Corrosion Association,
Corrosion & Prevention 99, Sydney, November 1999.
Queens Wharf Tower Refurbishment, Salome,
F. & Aguiar, O.; Australasian Corrosion Association, Corrosion & Prevention
99, Sydney, November 1999.
Protective Coatings for the Marine
Environment, Maritime Structures 2000 Conference, Sydney, Nov 2000.
Paint-Related OH&S Risk Assessments,
Presented at ACA NSW/SCAA Joint Technical Meeting, September 2002
Climatic Conditions for Successful
Application Of Zinc Rich Coatings, Australasian Corrosion Association,
Corrosion & Prevention 02, Adelaide, November 2002.
OH&S in the Protective Coatings Industry,
Presented at Australasian Corrosion Association Seminar "New Standards for
Protective Coatings", Melbourne, February 2003
Application and Inspection of Coatings for
Concrete, Presented at Australasian Corrosion Association Seminar "New
Standards for Protective Coatings", Melbourne, February 2003
Bill McEwan's Publications
Bowler, J.C.S., McEwan,
W.J.,"Corrosion
in the Hydro Electric Commission", Australian Corrosion Engineering
12(9), September 1970.
Bowler,
J.C.S., McEwan, W.J.,"Effects
of Arc Strikes on Structural and Pipeline Steels", Australian Welding
Research, Vol 4, 1975.
McEwan,
W.J., Bowler, J.C.S.,"Fracture
Extension Resistance of Several Steels of Australian Origin", Australian
Welding Research, Vol 6, 1979.
Davies,
D., McEwan, W.J.,"The
Measurement of Electrochemical Potentials on Manual Arc and Electric
Resistance Weld", Australian Welding Research, Vol 8, 1980.
McEwan,
W.J.,"Materials
and Corrosion", 1991 Mechanical Residential Seminar in Power Generation,
27th Jan. to 15th Feb. 1991.
McEwan,
W.J.,"Material
Selection and Use in the Marine Environment", Australasian Corrosion
Association Seminar, June 1991.
McEwan, W.J.,"Protective
Coatings for Steel and Concrete in Water and Sewage Installations", AWWA
Seminar, March 1993
McEwan,
W.J.,"Corrosion
in Domestic and Industrial Buildings", Master Plumbers Association
Seminar, March 1994.
Don Bartlett's Publications
Factors in Coating Selection
Institute of Engineers, Australia,
Building Products Seminar, June 1979.
Preparation of Enforceable Coating Specifications
Australasian Corrosion Association NSW Surface Preparation for Protective
Coatings Seminar, May 1981.
AS 2312
and Preparation of Coating Specifications
Seminars for Standards Australia promoting AS 2312 in Brisbane, Sydney,
Melbourne, Adelaide & Perth April/May 1981.
Selection
and Specification of Anti Corrosive Coatings,
Institute of Metal Finishing, August 1981.
Surface
Coatings in Historic Restorations
CSIRO Division of Building Research Historic Buildings Seminar, Nov 1982.
Cost
Effective Inspection,
Australasian Corrosion Association, November 1982 (ACA Best Review Paper
1982/83).
Inhibition
of Deposit Formation and Corrosion in Water Systems,
International Solar Energy Society, May 1982.
Decorative
Painting of Buildings book
issued under DHC Building Information Series (1984) ISBN 0644026596.
Selection
of Coatings for Steel Protection
Galvanisers Association, Sydney, October
1985.
The Role
of Applied Coatings in Inhibiting Corrosion in Reinforced Concrete
Structures 2nd Aust/Japan
Workshop Durability of Reo Concrete Structures, Melb. November 1988 CSIRO.
Ground
Contamination - a Commonwealth Laboratory's Perspective,
Risk Engineering Sem. IE Aust.,
Melbourne. August 1991.
Water
Vapour and Water Soluble Salts - the Scourge of Anti Corrosive Coatings, Australasian Corrosion Assoc. Annual Conference November 1992.
Predicting
the Durability of Building Materials,
Australian Corrosion Association Annual Conference. Adelaide, November.
1994.
Painting
Contractors Certification Program - Operation and Benefits,
Protective Coatings Seminar, University of
NSW, Sept. 1994.
Painting
Contractor Certification Program,
Blast Cleaning and Coating Association of Australia, Launch of Painting
Contractors Certification Program in Queensland, Brisbane, July 1995.
Corrosion
in Water Circulation Systems,
Australasian Corrosion Association, Victorian Branch, September 1995.
Design for
Corrosion Protection,
Standards Australia, Australia wide seminars on AS2312 and the Protection of
Steel Structures April - May 1995.
Corrosion
Mitigation in Water and Fuel Tanks - Evolution by Bitter Experience, 4th Annual Bulk Liquid Storage Tanks Conference,
Sydney NSW March 1996.
Corrosion
Protection of Structural Steelwork,
Australian Institute of Steel Construction, Victorian Branch, April 1996.
Planning
and Design for Corrosion Protection,
Surface Coatings Association of
Australia, Victorian Branch,
May 1996.
Paint
Standards and Certification in Australia - a Public Sector Viewpoint,
International Corrosion Conference, Melbourne. November 1996.
Why
Protective Coatings Sometimes Go Wrong,
International Corrosion Conference, Melbourne, November 1996.
Paint
Standards and Certification Downunder
Journal of Protective Coatings and
Linings, Jan 1997.
Concrete -
The Role of Water and Water Repellents,
Coatings for Concrete Seminar,
Australasian Corrosion Association, Melbourne, August 1997.
The
Performance of Building Materials in Australia
Fed. of Soc. Coatings Technologists, 75th
Conf., Atlanta, USA, Oct. 1997.
Coated
Metal Roofing and Wall Cladding, Pitfalls in Performance,
Aust. Corrosion Assoc. Annual Conference, Brisbane, November 1997.
Lead Paint
Management - Detection of Lead on Painted Buildings and in the Environment
Standards Australia Lead Paint
Management Seminar, Sydney, June 1998.
Paint
Standards in the Australian Public Sector
APAS - Sydney Water Corp. Paints & Painting Seminar, Sydney, June 1998.
Volatile
Organic Compounds in Paint - a Public Sector Perspective
RACI Polymer Group, Monash University. June 1998.
The
Selection and Quality Assurance of Penetrating Silicon Based Water
Repellents 2nd Rilem
International Conference on Rehabilitation of Structures, Melbourne,
September 1998.
The Deterioration of Building Facades
& Minimising the Costs of Maintenance,
Australasian Corrosion Association Annual Conference, Hobart, December,
1998
Quality Assurance and Standards for
Exterior Wood Coatings, (with
BS Dawson, NZ Forest Research Inst. and G Hora, Graunhofer Inst. Germany),
Surface Coatings Australia, Oct. 1998.
Galvanic Corrosion
Journal of Protective Coatings and Linings Vol 16, No. 2, Feb 1999 (also
published in Protective and Marine Coatings (Asia/Pacific) Vol 2(2) 1999,
Impra Latina (South America) and Corrosion Management, July 1999).
The Impact of the Australian
Environment on Painted Steel and Other Building Materials,
Blast Cleaning and Coating Association Annual Conference, Barossa
Valley, SA, Sept. 1999.
High Build Coatings for Cementitious
Surfaces, Australasian
Corrosion Association Annual Conference, Sydney, Nov. 1999.
Practical Issues in Cost Effective
Corrosion Protection, IRR
Conference Cost Effective Methods of Corrosion Control, Melb., June
2000.
Cost Effective Maintenance of Building
Exteriors, A Government Housing Department's Experience,
(with P Davis, Dept. of Human Services, Vic.) Surface Coatings Aust., July
2000.
Standards Australia Seminars promoting
AS/NZS 2311 Guidelines for Painting Buildings,
presented in Brisbane, Sydney, Melbourne and Perth, Dec 2000 and June 2001.
Industrial Pollution and its Impact on
Corrosion and Corrosion Mitigation Practices, ACA Conference, Newcastle, Nov. 2001.
Decorative Galvanized Steel - the Impact of Colour,
Galvanizers Association of
Australia, Sept. 2003.
Paint
Finishes Over Galvanizing, Why Do They Fail?
presented to ACA Conference, Melb., Nov. 2003.
|
