Fred Salome's Publications

Tank Linings Protective Coatings For Corrosion Control, University of NSW School of Applied Sciences, 24/08/85

Protection of Concrete Floors (Bayliss, Dr. S. & Salome, F.) Heavy Duty Coatings For Steel, UNSW School of Applied Sciences, 04/09/87

Liquid Applied Ultra High Build Coating For In-Situ Pipeline Refurbishment Australasian Corrosion Association 1988 Conference.

Coatings for Corrosion Control and Fire Protection, Building Sealants And Coatings Seminar, Melbourne Seminar Services, October 1988.

Water Borne Epoxy Coatings (Salome, F & Jewson, G) Australasian Corrosion Association Conference Corrosion 28, Perth, Nov. 1988.

Ultra-High Build Elastomeric Urethane Membrane Coating, Corrosion Control Via Heavy Duty Coatings, UNSW School of Applied Sciences, 28/09/89

Protective Coatings and Anti-Foulings For Small Craft Control Of Corrosion In Small Craft, ACA Tasmanian Branch, 10/10/89

Liquid-Applied Waterproof Membrane For Concrete Coatings Toward 2000 And Beyond, ACA Victorian Branch, 22/11/89

Investigation and Refurbishment of Re-Bar Corrosion in Concrete Status Of Heavy Duty Coatings, UNSW School of Applied Sciences, 27/09/90

Protective Coatings for Concrete: Concrete Repair Seminar And Exhibition, Building Research Centre, UNSW. 18/04/91 & 05/09/91.

Solventless Industrial Coatings Heavy Duty Coatings For Corrosion Control, UNSW School of Applied Sciences, 03/10/91

Silane Impregnation for Protection of Concrete Australasian Corrosion Association Conference Corrosion 32, Hobart, November 1992.

Evaluation of a Spot Test for Detection of Lead Surface Coatings Australia, 30, No. 9, p16-17, September 1993.

An Evaluation of Water Repellents for Concrete Presented at AustRoads 1994 Bridges Conference, Melbourne Feb. 16-18, 1994.

Environmental and Occupational Health and Safety Aspects of Lead Paint Removal Presented at Corrosion Prevention Centre of Australia Seminar, Coatings Towards 2000 and Beyond, Melbourne, March 16, 1994.

Practical Considerations in the Removal of Lead Based Paint (Chadwick, P. J. & Salome, F) Australasian Corrosion Association Conference Corrosion & Prevention 94, Adelaide, Nov. 1994.

Managing Lead Paint Removal Industrial Coatings and Corrosion Prevention, UNSW School of Materials Science and Engineering, 28/11/95.

Australian Standards For Lead Paint Management Presented at Corrosion Prevention Centre of Australia Seminar, Coatings Towards 2000 and Beyond, Melbourne, April 18, 1996.

Lead Paint Management, B. Gulson and F. Salome; 1996 Training manual for lead paint management course at Macquarie University Centre for Open Education.

Field Evaluation of the Mitigating Effect of Silane Treatment on AAR in Concrete Railway Sleepers 10th International Conference on Alkali-Aggregate Reaction in Concrete, Melbourne, August 21, 1996.

Occupational Exposures and Hazardous Wastes from Abrasive Blast Cleaning, Howard Morris and Fred Salome; 13th International Corrosion Conference Towards Corrosion Prevention, Melbourne, November 1996.

Occupational Exposures Associated with Abrasive Blast Cleaning, BCCA National Conference, Brisbane, August 18 1997.

Coatings for Concrete - An Overview, Presented at Corrosion Prevention Centre of Australia Seminar, Coatings for Concrete, Melbourne, August 21, 1997.

Recent Australian Experience in Lead Paint Management, Heavy Duty Coatings for Corrosion Protection, UNSW School of Materials Science and Engineering, October 1997.

Coatings for Concrete, Workshop Seminar, Australasian Corrosion Association Conference Corrosion & Prevention 97, Brisbane, Nov. 1997.

Specifications for Concrete Impregnation Howard Morris and Fred Salome; Presented at AustRoads 1997 Bridges Conference, Sydney, December 3–5, 1997.

Occupational Exposure to Heavy Metals from Bridge Maintenance Painting Howard Morris and Fred Salome; Presented at AustRoads 1997 Bridges Conference, Sydney, Dec, 3-5, 1997.

Synthetic Flooring Systems for Hotel Bars, Kitchens and Back-of-House, The Hotel Eng, Winter 98.

Coatings for Concrete, BCCA National Conference, Albury, August 24 1998.

Corrosion Potentials and Chloride Profiles for Reinforced Concrete Structures, Australasian Corrosion Association Conference Corrosion & Prevention 98, Hobart, November 1998.

Recent Case Histories of Lead Paint Removal in Australia, BCCA National Conference, Barossa Valley, September 9, 1999.

Corrosion Rates of Concrete and Steel in Sewers, Salome, F. & Horlyck, L.; Australasian Corrosion Association, Corrosion & Prevention 99, Sydney, November 1999.

Queens Wharf Tower Refurbishment, Salome, F. & Aguiar, O.; Australasian Corrosion Association, Corrosion & Prevention 99, Sydney, Nov 1999.

Protective Coatings for the Marine Environment, Maritime Structures Conference, Sydney, 2000.

Paint-Related OH&S Risk Assessments, Presented at ACA NSW/SCAA Joint Technical Meeting, September 2002

Climatic Conditions for Successful Application Of Zinc Rich Coatings, Australasian Corrosion Association, Corrosion & Prevention 02, Adelaide, November 2002.

OH&S in the Protective Coatings Industry, Presented at Australasian Corrosion Association Seminar "New Standards for Protective Coatings", Melbourne, February 2003

Application and Inspection of Coatings for Concrete, Presented at Australasian Corrosion Association Seminar "New Standards for Protective Coatings", Melbourne, February 2003

Repainting Sydney's Olympic Statues, NSW ACA Technical Seminar, May 2004, and SCA National Conference, Perth September 2004.

Refurbishment of Paringa Road Bridge, Australasian Corrosion Association, Corrosion & Prevention 08, Wellington NZ, November 2008.

Assessing the Risk of Zinc Chromate in Paint, Australasian Corrosion Association, Corrosion & Prevention 08, Wellington NZ, November 2008.

Review of IMO Regulations for Ballast Tank Coatings and Inspection, Presented at ACA NSW Technical Meeting, July 2009.

Marine Coating Inspection, Presented at Australasian Corrosion Association 2010 Seminar Series "Protective Coatings", Wollongong, Sydney, Newc., Brisbane, Gladstone and Melbourne, May/June 2010.